Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX810 - Europe - (PPE+PA*)-GF10 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX810 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL GTX™ 810 resin is a 10% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 3000 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX GTX810 resin is an excellent candidate for a wide variety of applications including electrical and lighting components, security (CCTV) housings.

UL Yellow Card Link E45329-101009462
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 8 cm³/10min ISO 1133
温度 280 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 3200 MPa ISO 527
降伏応力 65 MPa ISO 527
降伏ひずみ 3.5 % ISO 527
破壊応力 65 MPa ISO 527
破壊ひずみ 6 % ISO 527
曲げ弾性率 2900 MPa ISO 178
シャルピー衝撃強さ, +23°C 60 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 40 kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm 50 kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm 40 kJ/m² ISO 180/1U
Ball indentation hardness 90 MPa ISO 2039-1
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, B 200 °C ISO 306
ビカット軟化温度, 120°C/h 50N 205 °C ISO 306
線膨張係数, 平行 60 E-6/K ISO 11359-1/-2
線膨張係数, 直角 80 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.5 mm -
熱伝導率 0.24 W/(m K) DIN 52616
その他の特性.値単位テスト基準
吸水率. 3.3 % Sim. to ISO 62
吸湿率 1.11 % Sim. to ISO 62
密度. 1160 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 100 - 110 °C -
Pre-drying - Time 2 - 3 h -
Processing humidity ≤0.07 % -
樹脂温度 280 - 300 °C -
金型温度 80 - 100 °C -
Feed temperature 60 - 80 °C -
Zone 1 260 - 280 °C -
Zone 2 270 - 290 °C -
Zone 3 280 - 300 °C -
特殊な特性
成形加工法.
射出成形.
アプリケーション
自動車
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.